| GC
Sulfursorb Plus
ACTIVATED CARBON
FOR H2S TREAMENT
GC
Sulfursorb Plus is an non-impregnated, bituminous
coal based activated carbon which has been specially
developed for removing Hydrogen Sulfide and Sulfur compounds
from air streams. It is well suited for use in sewage
treatment plants and pumping stations where these compounds
are typically found. GC Sulfursorb Plus
gives you the high loading rates of impregnated carbons without
the thermal risks associated with some chemically treated
carbons.
| Specifications |
|
| |
|
| Mesh
Size : |
4x8 |
| Less
than No. 4, %: |
5(max) |
| Greater
than No. 8, %: |
10(max) |
| |
|
| Mean Particle Diameter, mm: |
3.4(avg.) |
| |
|
| Moisture,
% (as packaged): |
8(max) |
| |
|
| Typical
Density, lbs./cu.ft.: |
25 |
| |
|
g/cc: |
0.40 |
| Hydrogen
sulfide breakthrough capacity*, gH2S/cc
carbon |
0.20(min) |
|
| *H2S
capacity is measured using ASTM standard method D6646-01.
Testing requires passing a moist air |
stream
containing 1% by volume H2S though an appropriately sized
column (per ASTM requirements) |
packed
with activated carbon and monitoring to a 50 ppmv H2S
breakthrough. Results are reported as |
grams
of H2S adsorbed per gram of activated
carbon. |
| |
Standard
packaging is in 40lb. or 500kg. bags. Other packaging is available
upon request. |
Caution!
Wet activated carbon removes oxygen from air causing
a severe hazard to workers inside carbon vessels. Confined
space/low oxygen procedures should be put in place before
any entry is made. Such procedures should comply with all
applicable local, state and federal guidelines.
|
33 Paterson Street • Paterson, NJ 07501 • Tel: 973 523-2223 Fax: 973 523-1494
© 2004 General Carbon Corp.
Site Designed By Simlab.net
|
