| GC
Sulfursorb
CATALYTIC ACTIVATED CARBON
FOR H2S TREAMENT
GC
Sulfursorb is an non-impregnated, bituminous coal
based catalytic activated carbon which has been specially
developed for removing hydrogen sulfide and sulfur compounds
from air streams. It is well suited for use in sewage
treatment plants and pumping stations where these compounds
are typically found. GC Sulfursorb
gives you the high loading rates of impregnated carbons without
the thermal risks associated with some chemically treated
carbons. Additionally, by water washing this product, some of its h2S capacity can be restored.
| Specifications |
|
|
|
| |
GC Sulfursorb-A |
GC Sulfursorb-B |
GC Sulfursorb-C |
| |
|
|
|
| Pellet
Diameter, mm: |
3.8-4.1 |
3.8-4.1 |
3.8-4.1 |
| |
|
|
|
| Moisture% (as packed) max: |
15 |
15 |
15 |
| |
|
|
|
| Hardness,
%: |
90-95 |
90-95 |
90-95 |
| |
|
|
|
| CTC,%(min) |
70 |
60 |
60 |
| |
|
|
|
|
|
| Apparent Density, lbs./cu. ft.: |
22-27 |
25-30 |
32-35 |
| |
|
g/cc: |
0.36-.042 |
0.40-0.48 |
.51-0.55 |
| |
|
|
|
|
|
| Hydrogen
sulfide breakthrough capacity, gH2S/cc
carbon (min)* |
0.30
|
.0.20 |
0.10 |
*H2S capacity is measured using ASTM standard method D6646-01. Testing requires passing a moist air stream containing 1% by volume H2S though an appropriately sized column (per ASTM requirements) packed with activated carbon and monitoring to a 50 ppmv H2S breakthrough. Results are reported as grams of H2S adsorbed per gram of activated carbon.
|
