|
GC-II
Iodine
Impregnated Activated Carbon
GC
II is a bituminous coal-based activated carbon that is
impregnated with Iodine. This carbon is particularly
effective for the removal of radioactive methyl iodide from
nuclear fission products and mercury vapor from air streams.
It
is available in a variety of mesh sizes as well as in coconut
shell base.
| Carbon
Substrate |
|
| Mesh Size
4x6, %: |
90(min) |
| Less
than No. 4, %: |
5(max) |
|
Greater than No. 6, %: |
5(max) |
| CCl4
Activity, %: |
60(min) |
| Iodine No.,
mg/g: |
1000(min) |
| Surface Area,
m2/g: |
1000(min) |
| Hardness,
m2/g: |
95(min) |
| |
|
| Impregnated
Carbon |
|
| Typical Density,
lbs./cu.ft.: |
29-33 |
|
g/cc: |
0.46-0.53 |
| Moisture,
% (as packed): |
5(max) |
| Typical Mercury
Removal Efficiency, %:* |
99(min) |
| Typical Mercury
Removal Capacity, %:** |
6-12 |
*99%
adsorption efficiency under ideal operating conditions.
Performance under actual operating conditions may vary.
**100
lbs. of GC-II activated carbon will typically adsorb 6-12lbs.
of mercury vapors under ideal operating conditions.
Standard
packaging is in 200lb. drums. Other packaging is available
upon request.
|
|
|
Caution!
Wet activated carbon removes oxygen from air causing
a severe hazard to workers inside carbon vessels. Confined
space/low oxygen procedures should be put in place before
any entry is made. Such procedures should comply with all
applicable local, state and federal guidelines.
|
33 Paterson Street • Paterson, NJ 07501 • Tel: 973 523-2223 Fax: 973 523-1494
© 2004 General Carbon Corp.
Site Designed By Simlab.net
|
